1967 Chevrolet P10 Series chassis parts
Moog chassis part numbers for your 1967 Chevrolet P10 Series. Match position and notes (2WD/4WD, trim) before you buy so the parts fit and ship quickly.
Moog
| Where | Part type | Part # | Notes | How many | Shop | |
|---|---|---|---|---|---|---|
| Alignment Shim Multi-Pack | ||||||
| — | — | Alignment Shim Multi-Pack | K100264 | — | 1 | — |
| Ball Joint | ||||||
| — | Front Lower | Ball Joint | K6023 | — | 2 | — |
| — | Front Upper | Ball Joint | K6024 | — | 2 | — |
| Coil Spring Set | ||||||
| — | Front | Coil Spring Set | 6082 | 4.1L L6 4097cc250/cid | 1 | — |
| — | Front | Coil Spring Set | 6082 | 3.8L L6 3769cc230/cid | 1 | — |
| — | Front | Coil Spring Set | 6082 | 4.8L L6 4801cc292/cid | 1 | — |
| — | Front | Coil Spring Set | 6082 | 4.1L L6 4098cc250/cid | 1 | — |
| — | Rear | Coil Spring Set | 6101 | — | 1 | — |
| — | Rear | Coil Spring Set | CC603 | — | 1 | — |
| Control Arm Shaft Kit | ||||||
| — | Front Lower | Control Arm Shaft Kit | K6147 | — | 2 | — |
| — | Front Upper | Control Arm Shaft Kit | K6098 | — | 2 | — |
| Idler Arm | ||||||
| — | — | Idler Arm | K6096T | — | 1 | — |
| Sway Bar Bushing | ||||||
| — | Front To Frame | Sway Bar Bushing | K5241 | — | 1 | — |
| Tie Rod Adjusting Sleeve | ||||||
| — | — | Tie Rod Adjusting Sleeve | ES350S | — | 2 | — |
| Tie Rod End | ||||||
| — | Front Inner | Tie Rod End | ES370R | — | 2 | — |
| — | Front Outer | Tie Rod End | ES350L | — | 2 | — |
As an Amazon Associate we earn from qualifying purchases.