Looking for a suspension diagram, kit, or repair guide to diagnose and fix your Jeep Wrangler suspension noise or other problem? Look no further! We’re also happy to help you figure out what parts you need, just post a comment below with the year make and model and the problem you are encountering and we can guide you with the suspension kit, upgrade, or part numbers you need. #HAPPYMOTORING
Search and buy these parts on Amazon
Find the Suspension Parts you Need
What this Wrangler diagram covers
Wrangler pages on this catalog are JK (2007–2018). TJ (1997–2006) and JL (2018+) track bars, control arms, and ball joints are different lengths. Rubicon vs Sahara use the same basic arm layout, but aftermarket lifts change every number on this page.
Stock JK wear: ball joints, track-bar bushings, control-arm bushings, and tie-rod / drag-link ends. A wander or “death wobble” after a bump is usually the track bar or unit bearings, not a new set of cheap shocks. If it is lifted, measure the track bar and drag link before you order the stock Moog length.
Related: Grand Cherokee diagram, Gladiator lift kit.
Jump to: Front · Steering · Rear · Wrangler JK · Catalog diagrams
Front suspension
Ball joints
- Upper, 2017–2007: K3134T
- Upper, +/- 1° camber/caster offset, 2017–2007: K100311
- Upper, +/- 1/2° camber/caster offset, 2017–2007: K100056
- Upper, Replaces OEM Offset To Provide 1-1/2 Degree +/- Camber/Caster, 2017–2007: K100312
- Upper, +/- 2° camber/caster offset, 2017–2007: K100198
- Lower, 2017–2007: K3185
- Lower, Replaces OEM Offset To Provide 1-3/4 Degree +/- Caster/Camber, 2017–2007: K7403
Control arms
- Upper, ball joint not included, 2017–2007: RK641822
- Lower, 2017–2007: RK621823
- Upper, +/- 3 Degrees Caster And +/- 3 Degrees Pinion Angle, Adjustable, 2017–2007: RK100217
Control arm bushings
Sway bar bushings
- To frame, 2017–2007: K7466
Sway bar links
- 2017–2007: K750453
Track bar bushings
- Driver side, 1.56″ Outside Diameter, Contains Cross Axis Bushing, 2017–2007: K201643
- Passenger side, 1.45″ Outside Diameter, improved, Contains Conventional Non Cross Axis Bushing, 2017–2007: K201644
- Passenger side, 1.45″ Outside Diameter, OEM Type, Contains Conventional Non Cross Axis Bushing, 2017–2007: K200708
Wheel hubs & bearing assemblies
- 2010–2007: 513272
Steering
Drag link adjusting sleeves
- Pitman Arm To Connecting Rod, 2017: ES2012S
Drag link assemblies
- At pitman arm, 2017–2007: ES3624
Pitman arms
- 2017–2007: K440026
Steering linkage assemblies
- Contains Adjusting Sleeves, Drag Link And Tie Rod Ends, 2016–2007: DS800982A
Tie rod adjusting sleeves
Tie rod ends
- Left outer, 2017–2007: ES800594
- Right outer, Lower, 2017–2007: DS300043
- Right outer, Upper, 2017–2007: DS300005
Rear suspension
Control arms
- Upper, 2017–2011: RK642032
- Lower, 2017–2007: RK641777
- Upper, +/- 3 Degrees Pinion Angle, Adjustable, 2017–2007: RK100216
- Upper, arm only, 2010–2007: RK642032
Control arm bushings
Sway bar bushings
- To frame, Sport, Sport S, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, 2018: K201637
- To frame, Unlimited Rubicon, Sport Utility Vehicle 4 Dr., 2018: K201636
- To frame, Except Performance Suspension, 2017–2007: K201637
- To frame, Performance Suspension, 2017–2007: K201636
Sway bar links
- 2017–2007: K6700
Track bar bushings
Wrangler JK
Front suspension
Ball joints
- Upper, 2018: K3134T
- Upper, +/- 1° camber/caster offset, 2018: K100311
- Upper, +/- 1/2° camber/caster offset, 2018: K100056
- Upper, Replaces OEM Offset To Provide 1-1/2 Degree +/- Camber/Caster, 2018: K100312
- Upper, +/- 2° camber/caster offset, 2018: K100198
- Lower, 2018: K3185
- Lower, Replaces OEM Offset To Provide 1-3/4 Degree +/- Caster/Camber, 2018: K7403
Control arms
- Upper, 2018: RK641822
- Lower, 2018: RK621823
- Upper, +/- 3 Degrees Caster And +/- 3 Degrees Pinion Angle, Adjustable, 2018: RK100217
Control arm bushings
- Upper to axle, 2018: K200187
Sway bar bushings
- 2018: K7466
Sway bar links
- 2018: K750453
Track bar bushings
- Driver side, 1.56″ Outside Diameter, Contains Cross Axis Bushing, 2018: K201643
- Passenger side, 1.45″ Outside Diameter, improved, Contains Conventional Non Cross Axis Bushing, 2018: K201644
Steering
Drag link adjusting sleeves
- Pitman Arm To Connecting Rod, 2018: ES2012S
Drag link assemblies
- At pitman arm, 2018: ES3624
Pitman arms
- 2018: K440026
Tie rod adjusting sleeves
- 2018: ES800983S
Tie rod ends
Rear suspension
Control arms
- Upper, 2018: RK642032
- Lower, 2018: RK641777
- Upper, +/- 3 Degrees Pinion Angle, Adjustable, 2018: RK100216
Sway bar bushings
Sway bar links
- 2018: K6700
Track bar bushings
Figures F394, S179, R040 are in the catalog PDF below. The PDF also has leftover Jeep Renegade and Kia Borrego rows from the Moog book; ignore those.
If your year is newer than the catalog, use the year/make/model search on this page. Leave a comment with the year and the noise if you want a part-number check.