Need 2007 Honda Civic ball joints, control arms, or a front-end kit? This page is 8th-gen Civic (2006–2011). 2012+ 9th-gen and 2016+ 10th-gen arms and bushings are not a straight swap. Leave a comment with the year and the noise if you want a part-number check.
A clunk at low speed is usually a ball joint or sway link. Wander or inner-edge tire wear is more often a tie rod or a worn control-arm bushing. Most people replace the control arm as a complete unit with the ball joint already pressed in.
Find the Suspension Parts you Need
Other years: 2006 · 2007 · 2008 · 2009 · 2010 · 2011 · 2012 · 2013 · 2014 · 2015 · 2016 · 2017 · 2018
Search and buy 2007 Honda Civic parts on Amazon
Jump to: Shop notes · Works Kit · Front · Steering · Rear · Fitment notes
8th-gen Honda Civic (2006–2011) shop notes — 2007
2007 Honda Civic suspension — 8th-gen Civic shop focus
Model-year 2007 sits in the 8th-gen Civic Honda Civic window (2006–2011). It is confirm coupe/sedan/Si.
Catalog applications for 8th-gen Civic (2006–2011) often repeat the same SKUs across adjacent years in this generation — that is expected. This URL stays year-specific for 2007 with a self-canonical and year-locked heading/links. On-page catalog SKUs called out here include MOOG suspension, MOOG ES800374, MOOG EV800323, MOOG K500070, MOOG K500069, MOOG RK620382, MOOG CK620383, MOOG ES800373 — use only these rows (and the lists below), not torque charts we do not publish. Cross-shop the same model year: 2007 Honda Civic brake parts · 2007 Honda Civic shock parts.
These are shop notes for the 8th-gen Honda Civic (2006–2011) that includes 2007. Civic generations change control arms, hubs, and sway links — do not mix 8th vs 9th vs 10th-gen numbers.
What usually brings people here
- Low-speed clunk over bumps or driveways → ball joint or sway link. Most shops prefer replacing the control arm as a complete unit with the joint already pressed in.
- Wander, loose steering feel, or inner-edge tire wear → outer/inner tie rod (ES800374 / EV800323) or a worn control-arm bushing.
- Growl or rumble that rises with road speed → wheel hub/bearing (512322).
Key SKU choices
Outer/inner tie rods on this page: ES800374 / EV800323. Replace as a pair when play is present; an alignment is required after tie-rod work.
Fitment forks on this page
- Lower, bolt-on: left K500070, right K500069
- Lower, 1.3L: left RK620382, right CK620383
- Lower, 1.8L: left RK620382, right CK620383
- Outer, Optional: left ES800374, right ES800373
- Inner, 1.3L, 20mm at steering gear: EV800323
- Inner, 1.8L, 18mm at steering gear, Knurled Stud Provides Positive Grip When Making Toe Adjustments: EV800246
While you’re in there
While you’re tearing into the front end, inspect the matching side and the sway-bar links — one-sided wear is common after a hit or a long alignment delay. Confirm the hub (512322) if you have a growl that rises with road speed.
Shop notes only — not a service manual. Use the factory procedure or a Haynes/Chilton manual for wrench work, torque, and safety steps. Leave a comment with drivetrain, suspension type, and the symptom if you want a part-number check.
Works Kit — 2007 Honda Civic front-end (8th-gen · confirm coupe/sedan/Si hub forks)
For 2007 only — start the clunk path at sway L/R K750125/K750126, the steering path at outers ES800374/ES800373 + inners EV800323, and the hub path at 512322. order it all once, do it right. Tear-down tip for 2007: photograph fastener orientation, then buy the full stack so you are not waiting on a second order. Lower-arm complete path on this page: L RK620382 / R CK620383. Hub forks: 512322, 512257, 512256.
1. Clunk / sway kit
- Sway links — L K750125 / R K750126
- Optional lower BJ on this page — K500070
- Or lower arms complete — L RK620382 / R CK620383
2. Wander / tire-wear kit
3. Hub growl add-on
Search Amazon for 2007 Honda Civic suspension · Full lists are below.
2007 Honda Civic front suspension
Ball joints
Control arm bushings
- Lower rear, 1.3L: K201661
- Lower front, 1.3L: K201186
- Lower rear, 1.8L: K201661
- Lower front, 1.8L: K201186
Control arms with ball joint
- Lower, 1.3L: left RK620382, right CK620383
- Right lower, 1.3L: RK620383
- Lower, 1.8L: left RK620382, right CK620383
- Right lower, 1.8L: RK620383
Strut bumper bellows
Strut mounts
Strut spring seats
- Upper: K160373
Sway bar bushings
- To frame, 1.3L: K200293
- To frame, 1.8L, coupe: K200294
- To frame, 1.8L, sedan: K200293
- To frame, 2.0L: K200295
Sway bar links
2007 Honda Civic steering
Rack & pinion boot kits
Tie rod ends
- Outer, Optional: left ES800374, right ES800373
- Inner, 1.3L, 20mm at steering gear: EV800323
- Inner, 1.8L, 18mm at steering gear, Knurled Stud Provides Positive Grip When Making Toe Adjustments: EV800246
- Inner, 2.0L, 20mm at steering gear: EV800323
2007 Honda Civic rear suspension
Control arms
Control arm bushings
- Lower rear outer: K200916
Strut bushings
- Lower: K90650
Sway bar bushings
Sway bar links
Wheel hubs & bearing assemblies
Fitment notes
These Moog numbers come from the 2007–2018 catalog rows that include 2007. Confirm 4×2 vs 4×4, aluminum vs steel, and trim before you order.
Diagrams are on the Civic catalog page. Related Honda diagrams: Accord and CR-V. How to diagnose suspension noises.
Related: 2007 Honda Civic shock parts.
Leave a comment with 4×2 vs 4×4 and the noise if you want a part-number check. #HAPPYMOTORING
Need pads and rotors? See 2007 Honda Civic brake parts.