Need 2010 Ram 1500 suspension and steering parts? This is the early 4th-gen DS truck. Verify 4×2 vs 4×4, wheel count, ABS, and build date before ordering; do not mix Ram 2500/3500 solid-axle parts.
Other years: 2007 · 2008 · 2009 · 2010 · 2011 · 2012 · 2013 · 2014 · 2015 · 2016 · 2017 · 2018
Find the Suspension Parts you Need
Related: 2010 Ram 1500 brake parts.
Search and buy 2010 Ram 1500 parts on Amazon
Jump to: Shop notes · Works Kit · Front · Steering · Rear · Fitment notes
Leveling the rake? Compare ReadyLIFT, Rough Country, and Daystar 2″ kits for this generation: 2009–2018 Ram 1500 2 Inch Leveling Kit.
early 4th-gen DS Ram 1500 shop notes — 2010
2010 Ram 1500 suspension — DS early shop focus
Model-year 2010 sits in the DS early Ram 1500 window (2009–2012). It is not 2002–2008 DR/DH, not 2500/3500.
Catalog applications for DS early (2009–2012) often repeat the same SKUs across adjacent years in this generation — that is expected. This URL stays year-specific for 2010 with a self-canonical and year-locked heading/links. On-page catalog SKUs called out here include MOOG front, MOOG K80630, MOOG K100316, MOOG K100115, MOOG K500286, MOOG K7411, MOOG K200184, MOOG K200185 — use only these rows (and the lists below), not torque charts we do not publish. Cross-shop the same model year: 2010 Ram 1500 brake parts · 2010 Ram 1500 shock parts.
These generation-aware notes apply to the early 4th-gen DS Ram 1500. Confirm the VIN/build date and the catalog forks shown below before pressing joints or ordering hubs.
- Clunk over small bumps: inspect sway-bar links and frame bushings first; measure the sway bar before ordering.
- Steering wander or uneven tire wear: check inner and outer tie rods, ball-joint play, and control-arm bushings before alignment.
- Hub growl that changes while turning: verify ABS configuration, stud count, and production-date split before ordering.
- Support the lower arm, follow factory torque sequence, and perform an alignment after ball-joint, tie-rod, or control-arm work.
Works Kit — 2010 Ram 1500 front-end (early 4th-gen DS · not DR/DH · not 2013+)
These “order it all once, do it right” stacks are built only from Moog numbers already linked on this page — confirm 4×4 vs 4×2 and hub production-date forks before checkout.
1. Clunk / sway kit (both sides)
- Sway bar links ×2 (4×4 common) — K80894
- Optional if joints are loose: lower BJ press-in (4×4) — K500286 ×2 · or lower arms complete (L RK641504 / R RK621602)
2. Wander / tire-wear kit (both sides)
- Outer tie rods ×2 — ES80574
- Inner tie rods ×2 — EV800098
- Alignment after install. Upper BJ options on this page: K80630 · adjustable K100316 · Problem Solver K100115
3. Hub growl add-on
- Wheel hub/bearing — 515126
4×2 lower-arm note: L RK621606 / R RK621605.
Search Amazon for a 2010 Ram 1500 front-end kit · Full lists are below.
2010 Ram 1500 front suspension
- Upper ball joint: K80630
- Upper adjustable ±2.25°: K100316
- Upper adjustable ±3°, greaseable: K100115
- Lower, 4×4 press-in: K500286
- Lower, 4×2: K7411
- 4×4 lower rear/front bushings: K200184 / K200185
- 4×4 at-shock bushing: K200688
- Upper arms, left/right: RK620634 / RK621897
- Lower arms 4×4, left/right: RK641504 / RK621602
- Lower arms 4×2, left/right: RK621606 / RK621605
- 4×4 strut assembly except air: ST8606
- Strut bellows / lower bushing / mount: K201301 / K160326 / K160196
- 32mm frame bushing improved/standard: K201621 / K7353
- 36.8mm frame bushing: K7384
- Sway links 4×4 / 4×2 optional / 4×2: K80894 / K7400 / K750157
- Sway repair kit: K7300
- Wheel hub: 5-stud 515126
2010 Ram 1500 steering
2010 Ram 1500 rear suspension
Fitment notes
These Moog numbers are from the 2007–2018 catalog rows that include 2010. Catalog figures F335, F337, F338, F339 and steering figures S094/S111/S844 distinguish drivetrain and wheel-count layouts.
Related: 2010 Ram 1500 shock parts.
Measure components and confirm VIN fitment before ordering. #HAPPYMOTORING