Need 2001 Honda Civic ball joints, control arms, or a front-end kit? This page is 7th-gen Civic (2001–2005). 1996–2000 6th-gen and 2006+ 8th-gen arms and bushings are not a straight swap. Si uses different arms; stick to the Civic row for your trim. Leave a comment with the year and the noise if you want a part-number check.
A clunk at low speed is usually a ball joint or sway link. Wander or inner-edge tire wear is more often a tie rod or a worn control-arm bushing. Most people replace the control arm as a complete unit with the ball joint already pressed in.
Find the Suspension Parts you Need
Other years: 1991 · 1992 · 1993 · 1994 · 1995 · 1996 · 1997 · 1998 · 1999 · 2000 · 2001 · 2002 · 2003 · 2004 · 2005 · 2006 · 2007 · 2008 · 2009 · 2010 · 2011 · 2012 · 2013 · 2014 · 2015 · 2016 · 2017 · 2018
Search and buy 2001 Honda Civic parts on Amazon
Jump to: Shop notes · Works Kit · Front · Steering · Rear · Fitment notes
7th-gen Honda Civic (2001–2005) shop notes — 2001
2001 Honda Civic suspension — 7th-gen Civic shop focus
Model-year 2001 sits in the 7th-gen Civic Honda Civic window (2001–2005). It is confirm body style.
Catalog applications for 7th-gen Civic (2001–2005) often repeat the same SKUs across adjacent years in this generation — that is expected. This URL stays year-specific for 2001 with a self-canonical and year-locked heading/links. On-page catalog SKUs called out here include MOOG suspension, MOOG ES3581, MOOG EV469, MOOG RK640288, MOOG RK640287, MOOG ST8578L, MOOG ST8578R, MOOG K90560 — use only these rows (and the lists below), not torque charts we do not publish. Cross-shop the same model year: 2001 Honda Civic brake parts · 2001 Honda Civic shock parts.
These are shop notes for the 7th-gen Honda Civic (2001–2005) that includes 2001. Civic generations change control arms, hubs, and sway links — do not mix 8th vs 9th vs 10th-gen numbers.
What usually brings people here
- Low-speed clunk over bumps or driveways → ball joint or sway link. Most shops prefer replacing the control arm as a complete unit with the joint already pressed in.
- Wander, loose steering feel, or inner-edge tire wear → outer/inner tie rod (ES3581 / EV469) or a worn control-arm bushing.
- Growl or rumble that rises with road speed → wheel hub/bearing (512175).
Key SKU choices
Outer/inner tie rods on this page: ES3581 / EV469. Replace as a pair when play is present; an alignment is required after tie-rod work.
Fitment forks on this page
- Lower, 1.7L, ball joint not included: left RK640288, right RK640287
- Strut, Spring & Top Mount: left ST8578L, right ST8578R
- To frame, 25.4mm Sway Bar Diameter, Split Design: K90560
- Strut, Spring & Top Mount: left ST8622L, right ST8622R
- To frame, 12mm Sway Bar Diameter: K90570
- coupe, sedan: left K90453, right K90452
While you’re in there
While you’re tearing into the front end, inspect the matching side and the sway-bar links — one-sided wear is common after a hit or a long alignment delay. Confirm the hub (512175) if you have a growl that rises with road speed.
Shop notes only — not a service manual. Use the factory procedure or a Haynes/Chilton manual for wrench work, torque, and safety steps. Leave a comment with drivetrain, suspension type, and the symptom if you want a part-number check.
Works Kit — 2001 Honda Civic front-end (7th-gen Civic · not 8th-gen 2006+)
2001 Honda Civic: buy clunk/BJ path K90560 together with outers + inners/drag ES3581 + EV469 and keep 512175 in the cart if the bearing growls — order it all once, do it right. Fitment forks printed under Front/Steering on this 2001 post beat any “fits 19xx–20xx” Amazon title. Also note: hub forks also list 512174.
1. Clunk / sway kit
- Ball joint / clunk path named on this page — K90560
2. Wander / steering kit
- Outer / tie-rod end (page list) — ES3581
- Inner / drag-link companion on this page — EV469
- Alignment after install
3. Hub growl add-on
Search Amazon for a 2001 Honda Civic front-end kit · Full lists are below.
2001 Honda Civic front suspension
Ball joints
- Lower, coupe, sedan: K90332
Control arms
Control arm bushings
- Lower rear: K200053
- Lower front, Durable Socket Design Eases Installation, Vertical Mount: K200799
- Lower front, Vertical Mount: K200149
Strut and spring assemblies
Strut bumper bellows
- OE Material For Strut Performance And Longevity: K90462
Strut mounts
- coupe, sedan: K90649
Sway bar bushings
- To frame, 25.4mm Sway Bar Diameter, Split Design: K90560
Sway bar links
2001 Honda Civic steering
Tie rod ends
2001 Honda Civic rear suspension
Control arms
- Upper, Non Adjustable: RK641879
- Upper, Minus 4 To 6 Degree Camber, Adjustable: RK90351
- Upper, Minus 4 To 6 Degree Camber: RK641886
- Left lower, DX, HX, LX: RK642727
Control arm bushings
Strut and spring assemblies
Strut bumper bellows
Strut bushings
- Lower: K90650
Strut mounting kits
- Upper, coupe, sedan: K90646
Sway bar bushings
- To frame, 12mm Sway Bar Diameter: K90570
Sway bar links
Wheel hubs & bearing assemblies
Fitment notes
These Moog numbers come from the 1991–2006 catalog rows that include 2001. Confirm 4×2 vs 4×4, aluminum vs steel, and trim before you order.
Diagrams are on the Civic catalog page. Related Honda diagrams: Accord and CR-V. How to diagnose suspension noises.
Related: 2001 Honda Civic shock parts.
Leave a comment with 4×2 vs 4×4 and the noise if you want a part-number check. #HAPPYMOTORING
Need pads and rotors? See 2001 Honda Civic brake parts.